Grizzly Switch h8245 User Manual

modEl h8245

doUblE mini on/off

sWitCh

instrUCtions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

to reduce risk of serious burns, electrocu-

tion or death when installing this switch:

• only use this switch to replace an exist-

ing component switch that has the same

physical configuration and equivalent

electrical specifications/ratings.

figure 1. Model h8245 on/oFF switch.

• Installation must only be performed by an

introduction

the Model h8245 features two on/oFF toggle

switches in one assembly that operates two

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

separate circuits. this assembly fits into a ⁄4" x

• Turn off and completely disconnect all

power sources to the component before

installing the switch.

⁄

8" rectangular hole.

specifications

rated Voltage.....................................125V/250V

rated Current at 125V................................... 10A

rated Current at 250V.....................................6A

• Only install this switch on the "hot" wires.

do not install it on the neutral or ground

wires. otherwise, the component could

still be receiving live current even when

the switch is turned OFF.

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. it is not sealed or rated

for these environments.

• Make sure there is a verified compo-

nent ground on the circuit this switch is

installed.

Warning: no portion of this instrUCtion shEEt may bE rEprodUCEd in any shapE

or form WithoUt thE WrittEn approval of grizzly indUstrial, inC.

#ts13933 printed in ChinA